Request Custom Model
0

How To Clean Your LEGO® Bricks (Complete Guide)

Reading Time: 5 Min
|
Published: 19 November, 2021
Updated: March 13, 2023
We’re reader-supported. We may earn an affiliate commission when you buy through links on our site.
Let's Create Together
Start Designing Your Dream Custom Model Made From LEGO® Bricks!
Request My Custom Model

Note: Always follow the official LEGO® when handling your LEGO® Bricks or accessories

LEGO Bricks are great to play with and you can easily enjoy the experience of bringing all kinds of cool ideas to life with them. But just like anything in your home, these LEGO® Bricks can accumulate dust, dirt, and grime on them.

That means they can be a germ-riddled places and you have to find the right way to clean these properly. Which does make you wonder, how can you actively clean the LEGO® Bricks properly. Here you have a list of tips and tricks to help you get started.

Key Takeaway

  • Clean LEGO® Bricks manually with a container, warm water, and a bit of mild soap
  • If using the washing machine, use the gentlest wash mode and cold water
  • Place all pieces in a laundry bag or pillowcase to prevent tumbling
  • Allow for adequate drying time (up to 2 days) in a well-ventilated room
  • Avoid any source of heat like hair dryers when drying pieces
  • It will take 20 minutes up to multiple hours depending on how many LEGO® Bricks you have.
  • Take your time, and learn how to complete this cleaning process adequately for the best results.
  • Separating LEGO® Bricks and cleaning them individually is essential for good results.

List of LEGO® Bricks Cleaning Requirements

  • A Brick Separator
  • A soft cloth or cotton swab.
  • Mild soap or detergent.
  • Clean water for washing and rinsing your bricks.
  • An empty container to soak your bricks in, if necessary.
  • If using an ultrasonic cleaner, make sure that it is set up according to the manufacturer’s instructions and only use the dedicated LEGO® cleaning solution provided with the cleaner.
  • Any other items recommended by the manufacturer (e.g., special scrubbers, brushes).
brick seperator

List of Methods for Cleaning LEGO® Bricks

1. Handwashing

With a little bit of mild soap and some water, handwashing is one of the simplest and most effective methods for cleaning LEGO® bricks.

Start by dampening the cloth or cotton swab with warm water and adding a small amount of mild detergent or soap. Gently rub the pieces until they are free from dirt and grime, then rinse them off in clean water before setting them aside to dry naturally.

2. Steam Cleaning

If your LEGO® pieces are really grimy, steam cleaning may be a better option as it penetrates deeper and can get rid of the dirt more effectively. Use a steam cleaner that is specifically designed for cleaning LEGO® pieces.

3. Ultrasonic Cleaning

An ultrasonic cleaner is another effective way to clean your LEGO® bricks. Fill the tank with water and add a few drops of the special cleaning solution provided by the manufacturer, then submerge your bricks and turn on the machine.

The powerful vibrations produced by the machine will help to break up dirt and grime so that it can be easily wiped away.

4. Soaking

If you have particularly stubborn stains, soaking your LEGO® pieces in warm soapy water may be necessary to remove them. Place all of your pieces in an empty container and fill them with warm water and a bit of mild soap.

Let the pieces sit in the solution for at least 10 minutes before rinsing them off and setting them aside to dry naturally.

Handwashing Your LEGO® Bricks Step-By-Step Guide

  1. Start by dampening the cloth or cotton swab with warm water, then add a small amount of mild detergent or soap.
  2. Gently rub each LEGO® piece until it is free from dirt and grime.
  3. Rinse the pieces in clean water to remove any remaining soap residue.
  4. Set aside to dry naturally before reassembling with other pieces or storing away for later use.

Steam Cleaning Your LEGO® Bricks Step-By-Step Guide

  1. Place all of your LEGO® pieces in the steam cleaner and make sure they are evenly spread out so that they will be exposed to an even level of heat and moisture during cleaning.
  2. Turn on the machine and let it run for a few minutes until the pieces are free from dirt and grime.
  3. Remove the pieces from the steam cleaner and set them aside to dry naturally before reassembling or storing them away for later use.

Ultrasonic Cleaning Your LEGO® Bricks Step-By-Step Guide

  1. Fill the ultrasonic cleaner with warm water and add a few drops of cleaning solution provided by the manufacturer.
  2. Submerge all of your LEGO® pieces in the tank and make sure they are evenly spaced out so that they will be exposed to an even level of vibrations during cleaning.
  3. Turn on the machine and let it run for several minutes until all dirt and grime have been effectively broken up by the powerful vibrations produced by the machine.
  4. Remove the pieces and wipe them down with a clean cloth to remove any remaining dirt residue.
  5. Set aside to dry before reassembling or storing away for later use.

Soaking Your LEGO® Bricks Step-By-Step Guide

  1. Place all of your LEGO® pieces in an empty container large enough to fit them all comfortably and fill them with warm water and a bit of mild soap.
  2. Let the pieces sit in the solution for at least 10 minutes, so that all dirt and grime can be effectively broken up by the soapy water solution.
  3. Rinse off each piece with clean water until it is free from any remaining soap residue, then set aside to dry naturally before reassembling or storing away for later use.
  4. If necessary, repeat the soaking process until all pieces are completely free from dirt and grime.
  5. Finally, set aside to dry before reassembling or storing away for later use.

More Info

Can you clean LEGO® Bricks with a washing machine?

You should never wash your LEGO® Bricks in a washing Machine never dry them LEGO® Bricks in the oven, microwave, or with a hair dryer.

How much time does the cleaning process take for LEGO® Bricks?

It all comes down to how many LEGO® Bricks you have. If you have a small number of bricks, then it will mostly require 20 to 30 minutes, but it can also take multiple hours. It’s important to separate all the bricks and ensure that you are able to clean them individually.

This way you can be 100% sure everything is ok, and you fully cleaned everything without a problem. It’s a very good approach and an amazing idea that will make things easier all the time. It’s definitely going to pay off very well, especially if you do it right.

Conclusion

Cleaning your LEGO® Bricks is not very difficult, and there are multiple methods that you can try out. It’s all a matter of figuring out what approach works for you and where you are getting the best value. Yes, there are obvious challenges that can arise, and you will be very happy with the benefits and results in the long run.

Take your time, learn how to complete this cleaning process adequately, and in the end, you will be very impressed with the experience. Just take your time, avoid any rush, and the payoff will be well worth it!

A Few Essentials and My Recommended DJ Equipment by DJ Ferdi Vol
With so much information on my site I wanted to bring it down to an all in one place where I list my updated personal recommendations for 2021 and popular items that people have used themselves with succes. You can check it all out below.
DJ Essentials
The absolute DJ essentials every beginner has to start with or any advanced DJ has used or is still using.
DJ Controllers
It can be overwhelming to choose the right controller as there are countless things to consider. Having the right experience is key to know what controller someone needs. It's the thing you will use most and you can find the right DJ Controller here.
Headphones
Better headphones results in better overal audio quality as well as easier beat-matching and comfort while using them on the fly. These best DJ Headphones for 2021 are tested first hand.
DJ Gifts
It can be hard to find the right gift to give a DJ but it's also nice to treat yourself with some DJ gifts that you didn't even know existed.
Let's Create Together
Start Designing Your Dream Custom Model Made From LEGO® Bricks!
Request My Custom Model
belleve bricks sig fig
Written by Matthew Mitchell
Hey, I am Matthew Mitchell and I am an AFOL from the UK. I have been fascinated by LEGO® since I was a child. My two children are in love with LEGO® and it's because of them that my interest continued to grow, this is how I fell in to the rabbit hole of MOCs (my own creation). 

With every new MOC I saw I became just a bit more addicted to the endless possibilities that LEGO® offers. This led me to creating Belle-Ve Bricks, a platform where talented designers can share their work with the world.

And where we can create together with you, custom models.
About Matthew Mitchell
Create Your Dream
Start Designing Your Dream Custom Model Made From LEGO® Bricks!
Let's Talk
Belleve Bricks FullDark Logo
Subscribe to our newsletter so you can stay up to date with of our news.
LEGO® is a trademark of the LEGO Group of companies which do not sponsor, authorize, or endorse this site.
Copyright © 2024 - All rights reserved | 
Sitemap
0
    0
    Your Cart
    Your cart is emptyReturn to Shop